Using the RN17x Alert System in Tapaculo Lite

Thank you for purchasing the DEKIST Radionode family.

If monitoring is performed with the RN17x model that supports TELNET in the same band, remote data management is possible in the Tapaculo Lite program.

1. Setting in Options

If you click the device name located on the left side of the screen on the project screen, it will be activated as a channel related screen composed of numbers and graphs. In the case of RN171 (Ethernet) or RN172 (WiFi), the MAC address value is registered in the name. If you click 'Option' at the top of the graph, the setting window for device and channel appears.

After checking the name in the setting window, select and confirm the setting range of the corresponding channel and the buzzer usage condition.
The selected setting value is transmitted to the RN17x device and the device's buzzer sounds when it is out of the setting range.

Buzzer setting value

• OFF: Alarm is not used
• CH1: Buzzer sounds only when the sensor value of channel 1 is outside the alarm range (normal range)
• CH2: buzzer sounds only when the sensor value of channel 2 is outside the alarm range
• OR: Channel 1 or channel 2, if only one channel out of the alarm range, the buzzer sounds
• AND: When both channel 1 and channel 2 are out of alarm range, buzzer sounds

2. Setting the remote beacon

In addition, if you enter “3.BUZZER/SIREN SETUP MENU.\A.Set Alarm Trigger Mode” in the console menu and additionally set “G, H, I”, a warning light or You can make the beep sound work.

* To set the warning light IP address, you must use the dedicated program provided by the manufacturer. Before installation, please receive guidance from the selected warning light manufacturer on the conditions of use and setting methods.