Deviance

Deviance Status monitors the specific current state of the asset system as identified by the Deviance Management service.

Deviation management is a paid service that collects abnormal data outside of the set range that occurs in the asset system according to certain rules, provides it in a list and graph, and helps you identify the type and cause.

This is a very useful paid service that provides decision-making information that enables immediate response by monitoring the management of valuable customers' assets, such as sensitive or expensive items.

Deviation is Alarm setting It means data that exceeds the threshold set in the step, and deviation detection targets meaningful data selected through the exception handling conditions set according to the characteristics of the asset system. Deviation management considers multiple alarm detections as a single deviation event.

Deviation management is largely composed of the status of deviation and history of termination. Deviation status consists of in-progress, unconfirmed, excluded channels, and time chart of aberration events. Channels excluding deviations currently in progress or already in progress and management of deviations provide information with different icons and numbers with different colors. Automatic search can be selected for the chart, and the search period is set in units of 2 days, 1 week, and 1 month to provide a graph of deviation events.

Frequent alarms notified to managers can sometimes act as a cause of lowering work efficiency, so it is necessary to properly manage alarm detection according to asset characteristics.

* Support for use with paid accounts.

[ENG] Radio Node 365 introduces deviation management function

[ENG] How to use the deviation control of Radionode365

main function

• Reduce unnecessary aberration detection by setting up smart aberrations.
• It prompts you to enter the type of deviation, the cause, and the action.
• Provides detailed reports of all past aberrations.
• A timeline chart provides an at-a-glance chart of occurrence of deviations.

1. Deviance

1-1. Deviation management settings

• To use the deviation management function, click the gear-shaped setting button to the right of the deviation status title. Smart Deviation Detection와 Cause Analysissecond "ONIt must be set to “.

1-2. Deviation incident in progress

It's a bell icon placed on the left, and it's red. Shows the number of events that currently have an aberration in progress. That is, it means the number of channels for which alarm notification is in progress among the channels for which the alarm has been set.

Click the mouse on the bell or the red number to view the details of the current deviation.

1-3. unconfirmed aberration

It is a square-shaped icon located in the center and used in blue. This refers to the number of incidents among previously occurring deviations for which the manager did not enter a reason after confirmation. If you turn off the cause analysis function in the settings pop-up window, unconfirmed deviation events cannot be checked from the list.

A. Leave the reason for the deviation

In Deviation Management Settings Smart Deviation Detection와 Cause Analysissecond "ONIf set to “, all deviations that occurred are automatically saved and provided as a list. In the list, you can enter the cause and action for the incident (channel). Your entries are recorded as deviation reports.

How to leave a reason for deviation is as follows.

1. If you click the number of cases in [Unconfirmed Deviation Incidents] unconfirmed aberration A pop-up window with a list will open.
2. “ on the right side of the listEnter reasonClick the ” button toLeave the reason for the alarmCheck the deviation event number, occurrence and duration in the pop-up window.
3. Enter and save the type of deviation (cause) and action.

1-4. Deviance Management Exclusion Channel

It is a triangle icon, located on the right, and has an orange color. If an alarm is set on a channel, it is automatically included in the deviation management channel. It means a channel for which no threshold alarm has been set.

2. Deviation event time chart

2-1. chart settings

• The chart setting is placed at the bottom of the Deviation Status page to provide a graph of the deviation channel and the occurrence time for each channel.
• Deviation management settingsin Smart Deviation Detection와 Cause Analysissecond "ONSet the period (2 days, 1 week, 1 month) and whether to use automatic search for the automatically created aberration list by setting chart settingsYou must proceed from

• Deviation point search: Set the point to move to by pressing Previous/Next on the chart. When “Enable” is set, the X-axis (date) of the chart automatically moves to the point at which the deviation occurred. If set to “unused”, it moves to the previous/next date regardless of whether a deviation occurred.
• Search Period: Set the view size of the chart. If set to “1 week”, data is retrieved from Sunday to Saturday of the selected week.

2-2. search period

• You can use the automatic search function for the search period in the unit set in Chart Settings > Chart Period. In addition, the user can click the date marked in red to designate the point of time to search for deviations from the desired date and the section.
• Deviation events are sequentially expressed on the chart according to the chronological order in which they occurred.

2-3. Channel Selection – User Defined Channels

All channels with deviations within the set search period are searched. To display only the desired channels on the chart, the default 'Select All'second releaseAfter that, select [select/deselect] for individual channels in the following way.

2-4. Deviation incident report output

Click the bar for the time you want to view in the Searched Deviation Incident Time chart. If the range is small and difficult to clear, you can expand the chart section by dragging the mouse.

Click on the shaded time bar to generate an aberration incident report. If there are actions to be taken, the contents are printed together. After checking the contents, press the print button to get the printout in the desired format.