How to update the RN17X firmware

Thank you for purchasing the DEKIST RN17x product.

RN17x models support USB communication. Therefore, it is possible to communicate with various devices through the USB port. You can easily update the firmware by putting the firmware in a USB memory that supports the FAT32 file system.

materials: Firmware file, USB memory, 6V DC Adapter or PoE 

The firmware file is sent to Dekist Co., Ltd. Request separatelyYou must. master@dekist.com Please contact us.
The firmware file will be sent compressed, so please make sure to uncompress it before using it.

1. Prepare a USB memory. FAT32 Only file systems are supported. Other file systems are not supported. (FAT32 is supported by default for USB memory up to 32GB capacity.)

2. Into USB memory ” rn17ximg.hex File called “to USB memory. Copy without folder합니다.

3. Insert the copied USB memory into RN17x. Insert into USB port합니다.

4. 6V DC adapter 또는 PoE To supply power.

5. PoE powerWhen using , the red LED blinks, and after a while, the words – – – – are displayed in the segment.
6V DC adapter powerWhen using, the red LED lights up Flashingand after a while, the phrase Soft AP will be displayed in the segment. LED Turns off.

6. There is an update 완료Has been.

Precautions!

When the update is complete Delete all settingsAnd by default 초기화 It's possible. (5-minute transmission cycle, automatic IP)
Therefore, check the RN17x settings in advance back upYou should.(IP address setting, warning light setting, transmission cycle, etc.)
RN171In the case of After 2018 years Only available in firmware version.
RN172In the case of After 2017 years Only available in firmware version.