RN17X Display Indication Code

Thank you for purchasing DEKIST RN17X.

The RN17X device has three indicators (LED, CH3 display, CH1 display). The LED operates in two colors and blinks green to indicate normal operation. When data is transmitted or an alarm occurs, it changes to flashing red.

You can check the status of the product by checking the display code below.

1. RN171(LAN) display indication code

Expression of IP address

• When the power is first turned on, an IP is automatically assigned and a portion of the IP address is displayed while the buzzer sounds 3 times. IP address 192.168.1.28 In this case, it is displayed as above.

---

representation of data

• In most cases, it displays the current data value. Above is the temperature 21.83 ℃, humidity 33.29%This is the data value displayed when .

---

Automatic data backup

• Displayed when data transmission to RADIONODE365 failed due to unstable network environment, the number above is Number of samples stored in internal memorymeans

---

USB setting mode

• Displayed when RN171 and PC are connected with a USB cable without power connection. Change settings for the productIt's a mode.

---

Identification code (I-CODE)

When using the RADIONODE365 cloud, there is a four-digit code to easily register your device. using this code Device registrationYou can do this easily.

✓ Learn how to register a device through I-CODE

---

2. RN172(WiFi) display code

Expression of IP address

• When the power is first turned on, an IP is automatically assigned and a portion of the IP address is displayed while the buzzer sounds 3 times. IP address 192.168.1.28 In this case, it is displayed as above.

---

representation of data

• In most cases, it displays the current data value. Above is the temperature 21.83 ℃, humidity 33.29%This is the data value displayed when .

---

Automatic data backup

• Displayed when data transmission to RADIONODE365 failed due to unstable network environment, the number above is Number of samples stored in internal memorymeans

---

USB setting mode

• Displayed when RN172 and PC are connected with a USB cable without power connection. Change settings for the productIt's a mode.

---

Connecting to the Internet

• Displayed when starting a Wi-Fi wireless Internet connection.

---

Internet connection failure

• This appears when the Wi-Fi wireless Internet connection fails and the SSID/password is entered incorrectly.

---

SSID/Password saved

• Displayed when SSID and password settings are completed in Wi-Fi setup mode.

---

Internet connection successful

• Displayed when the Wi-Fi wireless Internet connection is successful.

---

Wi-Fi setting mode

• This is a mode where only the power is connected without a UA device connected, and Wi-Fi is set up using a smartphone.

---

wifi signal strength

• This screen appears as soon as a Wi-Fi wireless Internet connection is established, and the wireless strength is displayed as an LQI value. (Value 0~255 / higher is better)

---

Identification code (I-CODE)

When using the RADIONODE365 cloud, there is a four-digit code to easily register your device. using this code Device registrationYou can do this easily.

✓ Learn how to register a device through I-CODE

---