How to update RN001 firmware

materials: Firmware file, USB memory, 6V DC Adapter

The firmware file is sent to Dekist Co., Ltd. Request separatelyYou must. master@dekist.com Please contact us.

1. Prepare a USB memory. FAT32 Only file systems are supported. Other file systems are not supported.

2. USB stick” image. hex File called “to USB memory. Copy without folder합니다.

3. Transfer the copied USB memory to RN001. Insert into USB port합니다.

Connect the 4.6V DC adapter Power supply합니다.

5. LED blinks. After a while, all LEDs except the power LED turn off.

6. Update 완료Has been.

Precautions!

When the update is complete Delete all settingsAnd by default 초기화 It's possible. (10-minute transmission cycle, automatic IP)
Therefore, check the setting of RN001 in advance back upYou should.(IP address setting, RN500 setting, transmission cycle, etc.)
RN001The current firmware version of After 2016 years Only available in firmware version.