UA Family Help

Thank you for purchasing DEKIST UA products. UA product is a Radionode device with USB output. The UA device converts the analog signal of the external sensor into a digital signal...

Thank you for purchasing the DEKIST RN400 product. ✓ The sub-models are as follows. RN400-T2 CS (4-channel 4-20mA transmitter) UA20A (2-channel 4-20mA transmitter) UA20B (1-channel 4-20mA 12V Loop Power transmitter) UA20A,...

The UA20 family is a device that receives analog signals from a sensor, converts them to digital, and transmits them via USB. Unlike the main purpose, often using contact signals as UA20 ...

Is it possible to develop apps using UA products? Available! Want to develop your app using UA products? Available! The UA sensor family supports various OS, but ...

Thank you for purchasing DEKIST UA products. The UA family is a transmitter that is inserted into a USB port and the sub-models are UA10, UA13 (UA30), UA20, UA50, UA51,...

UA20 product converts 4-20mA or 0-20mA signal to digital value of sensor. This is how to connect the 4-20mA output sensor.

Thank you for purchasing the DEKIST UA50 product. The UA50 product performs monitoring to detect Total Volatile Organic Compounds using a metal oxide (MetalDxide) sensor. UA50...

Thank you for purchasing DEKIST UA20-B. UA20-B is designed to support 12VDC power output terminal and 4-20mA 1 channel. Therefore, the leak detection function is composed of a leak sensor and a resistor in parallel...

To use the UA product in WES 7 OS, it is necessary to check whether the driver is installed separately. “Windows Embedded Standard 7” i.e. WES 7 OS is...

Thank you for purchasing DEKIST UA52-O2. UA52-O2 consists of an optical oxygen measurement channel protruding in the front and a channel measuring atmospheric pressure or temperature in the lower part...

How to use the UA-58 in a confined space.

The Radionode USB Sensor transmitter series has simple commands to read or set parameters. The sensor commands are very similar to the AT commands of a telephone modem....

The UA10 product is very convenient during KOLAS calibration because the measured values ​​can be checked just by connecting to a PC. The UA10 product requires a USB extension cable or USB...