RN400 Family Help

Thank you for purchasing DEKIST RN400 product. RN400 is a battery-powered UPS-based device that supports WiFi and HTTP. Channels are based on temperature and humidity, such as door opening, contact,...

Thank you for purchasing the DEKIST RN400 product. The RN400 T2 model has sub-models that specialize in functions. Sub-models are connected with specialized sensors to provide various...

This section describes how to connect the RN400 to RS-485.

We will inform you of the ability to change the internal settings of the RN400 device using the Debug command. The functions that can be set with the Debug command are as follows. H2EX, H2PS temperature and humidity...

Thank you for purchasing the DEKIST RN400 product. ✓ The sub-models are as follows. RN400-T2 CS (4-channel 4-20mA transmitter) UA20A (2-channel 4-20mA transmitter) UA20B (1-channel 4-20mA 12V Loop Power transmitter) UA20A,...

Thank you for purchasing the DEKIST RN400 product. The RN400 is basically a device that requires a Wi-Fi connection. However, the sensor value is displayed on the OLED screen even without a Wi-Fi connection...

Thank you for purchasing the DEKIST RN400 product. The RN400 unit is available in two upper models, the H2 and T2, and various sub-models offering specialized monitoring...

Thank you for purchasing the DEKIST RN400-xx_EX product. ✓ The sub-models are as follows. RN400-H2 EX (Multi-Function Temperature and Humidity Transmitter) RN400-T2 EX (Multi-Function Temperature Transmitter)...

RN400-T2CS product converts 4-20mA or 0-20mA signals into digital values ​​of the sensor. This is how to connect the 4-20mA output sensor.

Thank you for purchasing the DEKIST RN400 product. This article is about initialization and update necessary when using the product. 1. RN400 Factory Reset...

How to send data to HTTP web server using HTTP Radionode Protocol V2.

Thank you for purchasing the DEKIST RN400 product. The model is mainly composed of H2 and T2. H2 model has 2 PS, EX, T2 model has PS, EX, TS,...

Thank you for purchasing the DEKIST RN400 product. To copy setting values, all set values ​​such as AP (WiFi), measurement/transmission cycle, and server settings are saved in the SD card and set values ​​are transferred to other RN400s...

Thank you for purchasing the DEKIST RN400 product. ✓ The sub-models are as follows. RN400-H2 EX (Multi-Function Temperature and Humidity Transmitter) RN400-T2 EX (Multi-Function Temperature Transmitter)...

Thank you for purchasing the Radionode film type temperature sensor RG41. ✓ The sub-models are as follows. RN400-T2 EX (Multifunction Temperature Transmitter) RN400-H2 EX (Multifunction...

Radionode's film-type sensor ZeroLeak temperature sensor was developed to prevent cold air from leaking out of the refrigerator and to prevent frost formation.

This article explains the case of logging using an SD card without a WiFi connection to the RN400 device. The SD card data logging function measures...